BQYHT - EPOXY RESIN PART A
- MSDS: BQYHT
- Manufacturer: CHEMICAL COMMODITIES AGENCY
- Product Name: EPOXY RESIN PART A
- National Stock Number: 8040-00-858-9798
Product Identification
Product ID:EPOXY RESIN PART A
MSDS Date:06/13/1989
FSC:8040
NIIN:00-858-9798
Kit Part:Y
MSDS Number: BQYHT
Responsible Party
HIGHLAND, CA 92346-2699
US
Emergency Phone: 714-864-2310
Info Phone: 714-864-2310
Cage: 60777
Contractor
Telephone: 909-864-2310
Cage: 60777
Ingredients
EPOXY RESIN
Fraction By Weight: >10%
KAOLIN
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: >10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYES: DIRECT CONTACT WITH THE PRODUCT MAY CAUSE
IRRITATION. SKIN: EPOXY RESINS ARE POTENTIAL DERMAL SENSITIZERS.
INHALATION: INHALATION IS NOT A ROUTE OF EXPOSURE.
First Aid
First Aid:EYE: FLUSH IMMEDIATELY WITH WATER FOR 15 MINUTES. CONSULT A
PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH AFFECTED AREA WITH
SOAP AND WATER. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Fire Fighting
Flash Point Method:TCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON
DIOXIDE.
Fire Fighting Procedures:PERSONS EXPOSED TO PRODUCTS OF COMBUSTION
SHOULD WEAR SELF CONTAINED BREATHING APPARATUS AND FULL PROTECTIVE
EQUIPMENT.
Accidental Release
Spill Release Procedures:WEAR RUBBER GLOVES AND WIPE UP WITH ABSORBENT
MATERIAL. RESIDUE MAY BE REMOVED WITH A CHLORINATED SOLVENT.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY LOCATION.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED.
Ventilation:STANDARD INDUSTRIAL VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:APPROPRIATE PROTECTIVE CLOTHING.
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Viscosity:90,000 CPS
Stability
Stability Indicator/Materials to Avoid:YES
NOT ESTABLISHED.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION CAN YIELD LOW
MOLECULAR WEIGHT HYDROCARBONS, CARBON MONOXIDE.
Disposal
Waste Disposal Methods:THIS PRODUCT DOES NOT MEET THE DEFINITION OF
HAZARDOUS WASTE. UNDER 40 CFR DISPOSE OF IN ACCORDANCE WITH STATE
AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.